Hard Sprial High Speed Doors
Hard Sprial High Speed Doors
| 
|
- Specification
- Features
- Door Structure blueprint
- Panel
PARAMETERS | TECHNICAL AND OPERATING SPECIFICATIONS |
APPLICATION | Inside and outside |
MAX CLEAR DIMENSIONS | 8000 x 7500 mm |
0.5~ 2.5 m/s (Setting depending on the size) | |
WATER PERMEABILITY | ≤700pa, Class 6 |
WIND PERMEABILITY | 5kpa, Class6 |
OPERATING TEMPERATURE | -10°C +40°C |
GUIDE STRUCTURE | Galvanized steel+Aluminium alloy |
CURTAIN | OUTSIDE/INSIDE: pre-painted alluminium with PU forming , the thickness 43/60/80mm |
CONTROL PANEL | Inverter 380 V with microprocessor |
POWER SUPPLy | 380V，50/60HZ |
Motor Sever motro (SEW motor option) | |
EMERGENCy OPENING | STANDARD |
Manual crank release (counterweight) | |
SAFETY EDGE | STANDARD |
Integrate in photocells barriers activated up to a height of 3000mm | |
Adopts a special control system, the core is a DSP processing chip, and the system accurately controls the opening height of the door body by receiving the SEW motor encoder signal.
It has the characteristics of good heat insulation, light weight, high strength, impact resistance, etc. The door type is suitable for the fast passage of indoor and outdoor logistics and production. Adopting this door type can save enterprises a lot of energy loss due to air circulation, and save about 80% of energy compared.
 |  |
|
|
|
|
Facebook
LinkedIn 
Instagram